Preview mode · MechAMS for Bambu Lab A1

MechAMS generator preview

Try the slicer settings and see how the MechAMS workflow is configured. Unlock access to generate your setup-ready G-code.

Downloads overview Generator docs

Printer

Parameters

Adjust these for your printer and mechanism. Unlock G-code when you are ready to generate the file.

Output type

Sample slot positions (X)

Preview-only values. Unlock to load the measured setup preset.

Slot 1 X

Slot 2 X

Slot 3 X

Slot 4 X

Slot 5 X

Slot 6 X

Slot 7 X

Slot 8 X

Z disengage

Z height

Speed (mm/min)

Z engage profileFast engage speed (mm/min)

Pressure relief

EnableLocation

Retract length (mm)

Speed (mm/min)

Unload / load

Unload length (mm)

Unload speed (mm/min)

Extra load length (mm)

Load speed (mm/min)

Wipes

Wipe before cutDry wipe between unload/load

Stick sway

Enable sway motion

Anti-ooze temp dip

EnableDrop (°C)

Chamber purge

Length (mm)

Speed (mm/min)

Retract (mm)

Need the sharing rules? See the License terms.

Output access

Preview the setup, then unlock generation with MechAMS access.

Slot map reminder

Slicer filament 1 maps to physical slot 1, filament 2 to slot 2, and so on. Slots 5-8 are expanded paths only when your A1 build is configured for them; leave unused paths unassigned.

Tune the parameters on the left. Unlock access when you are ready to generate the file.